· The energy saving effect of this 2.5 billion LED light source products is equivalent to the energy generated by 75 medium-sized thermal power plants.
· Landdevans has been sold to a Chinese consortium including LED packaging manufacturer Mulinsen Co., Ltd. Through this acquisition, Round Vans' LED light source products will be able to obtain cost-effective LED components.
Lang Dewans, one of the world's leaders in general lighting, has made a commitment to the Clean Energy Ministerial Conference Global Lighting Challenge (GLC). At the 8th Clean Energy Ministerial Conference Beijing Summit (CEM8), Roundmans announced that by 2023, the company plans to sell a total of 2.5 billion high-efficiency LED light source products.
“We have taken the initiative to make this commitment and are proud to be part of the Global Lighting Challenge. LED light sources are not only environmentally friendly but also highly economical. Today's LED light sources are combined with intelligent lighting solutions. It is possible to reduce energy consumption and costs by 90%.†Thomas Dreier, Head of Global R&D at Landwells, said: “Lundvans has invested a lot of resources in developing the potential of LED light sources in the future, which will continue to expand in energy saving. The imagination space consumed."
The Clean Energy Ministerial Conference (CEM) is a forum of countries committed to transforming global clean energy production and consumption. The Global Lighting Challenge is an initiative launched in the winter of 2015 with the goal of promoting the use of 10 billion high-performance, high-quality, cost-effective lighting products to contribute to climate change.
If Roundmans reached the goal of selling 2.5 billion LED light source products by 2023, its energy-saving effect is equivalent to the energy generated by 75 medium-sized thermal power plants. [1]
The sale of Osram's sale of Roundmans to the Chinese consortium was completed on March 1, 2017 and began to generate economic benefits. The consortium consists of strategic investor IDG Capital, LED packaging manufacturer Mulinsen Co., Ltd., and Yiwu State-owned Capital Operation Center. Landwells will continue to expand its product portfolio of LED light sources, LED luminaires and intelligent lighting. As one of the world's largest manufacturers of LED components, Mulinsen will support Landvewans' future product development strategy and complement each other.
[1] 2.5 billion LED bulbs refer to sales between 2017 and 2023 (including 2023); energy consumption is based on comparison with traditional lighting energy consumption.
Future Bus connectors Description
Future Bus connectors, which use 2mm style have a mating distance of 10mm. Both Future bus and the upgrade Future bus+ are out-dated.No additional work has been done to upgrade the specification over the years. However we still produce products which meet the Physical and Electrical layers of IEE P896.
Antenk future bus connecto feature
designed in metric dirnension on 2 millimeters grid over 5 rows.
1 Standardized product through EIA (USA), IEC and CECC (international).
2 Selected by IEEE as the interconnection system for Futurebus + / SCI / VicBus.
3 Multi-sources product,use for telecommunication, network, server / workstation market.
4 High tempersture materials SMT compatible.
5 Modular design giving flexibility for system design.
6 Stackable end to end without loss of contact position.
7 High density (more than 2 times as compared to the standard inch based " Euroconnector DIN 41612" ).
8 Tuning Fork female contact concept for higher robustness and improved reliability
(low contact resistance and high normal force).
9 Low insertion force design.
10 Inverse connector system (signal and power).
11 Optimized solder and compliant press-fit terminations for backplane and circuit board connectors.
12 differents mating lengths on signal and 3 on power for standard connector system.
Future Bus connectors Application
Telecom backplane board
Antenk offers a complete line of 5+2 and 8+2 Hard Metric Connectors as well as a complete line of 4 and 5 row Future bus Connectors.
4 and 5 row Future bus Connectors
4 Rows Signal & Power
5 Rows Signal & Power
Female IDC Type 4&5 Rows
Power Connector & Cable
Shroud
Vertical, 5 Rows
Right Aangle, 5 Rows
Vertical, 4 Rows
Right Angle, 4 Rows
5+2 and 8+2 Hard Metric Connectors
2.0mm Future Bus Connector Male DIP
2.0mm Future Bus Connector Female DIP
2.0mm Future Bus Connector Male Press Fit
2.0mm Future Bus Connector Female Press Fit
2.0mm Future Bus Connector Power Type
2mm HM (hardmetric) Connector Introduction
System designed to meet the current and future needs of instrumentation applications giving excellent electrical and mechanical characteristics. It is a high performance, high density system with flexible configuration which offers upgradeability. The connector system is fully supported by Antenk spice models to guarantee choosing the right product to match the application.
ANTENK 2.0mm HARD METRIC CONNECTOR MODULES comply with international IEC 917and IEC 61076-4-101
standards. The connector systems in telecommunication and other industries require hight density connectors to support
larger amounts of data increasingly higher speeds antenk 2mm hardmetric modules offer the solution
Features and Benefits:
This high density connector modules can be stacked end to end without loss of space.
1,ANTENK developed the 2.0mm series under thorough consideration of impedance match, propagation delay,
cross talk, reflection. It is the ideal connector for digital high speed data application.
2,ANTENK offers differend types with inverted mating configuration. The male connector is a fixed module at the
backplane and the female commector is a free component of the plug-in module. The male connector has 5 signal row.
3 The outer shielding rows z and f of the male connector engage the shielding contacts of the famale connector. theshield
is also designed for gas tight, press-fit installation.
4 The connector system offers 15 contact length that utilize the proven press-fit assembly technique. Within the 15
contact length are 3 mating levels, achievable on both the plug-in and rear I / 0 side.
5 Coding system prevents mix-up and wrong mating between male and female connectors.
6 The 2.0mm hard metric connectors and DIN 41612 connectors can be used on the same PC board as both have the
same mating distance.
7 Staggered make-break pin populations for optional hot-swap capability.
8 Rear pin option for through-the-backplane I/O application.
9 High density PCI capability,shield for EMI/RFI protection.
2mm HM (hardmetric) Connector Features:
High density system with small real estate on backplane and daughtercard
Extensive range of signal, power, coaxial and fibre board-to-board and cable-to-board connections
Modular units give flexible configuration
Special versions for VME64 extensions and CompactPCI
Signal contact rating 1.5a fully energized
Universal power module rated at 7.8A/line, 23.4A fully energized
All lines impedance controlled to 50 (single ended) and 100Ω (differential) nominal
Safe design, complies with IEC950 in mated condition
Universal power module is safe in unmated condition
Several performance levels for board and cable connectors with unshielded and shielded versions
Mismatching keys block mating before any contact touch
Small press fit board hole allows maximum track width and minimum signal corruption
1.4 to 5.6mm (0.055 to 0.220 inch) Backplane thickness range
2mm HM (hardmetric) Connector Applications
Communications & Networking, Computers & Computer Peripherals, Sensing & Instrumentation
Metric Connectors,2.0Mm Hard Metric Connectors,Hard Metric Connectors,Hard Metric Female Connector,2.0mm Future Bus Connector Male DIP,2.0mm Future Bus Connector Female DIP
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com