Summarize the method of smart home decoration

With the improvement of people's economic level and the gradual opening of ideas, it is only a matter of time before the popularity of smart homes. In order to be able to comfortably greet the smart home to bring a sense of science and technology life, Xiao Bian to share a very useful method for smart home renovation.

First, intelligent lighting

At present, the relatively simple solution is to replace the traditional wall switch with a smart switch, so as to achieve the goal of networking the lights in the home.

1. Switch bottom box to reserve the zero line

The normal switch panel has only a fire wire and no neutral wire. If installing a smart switch, try to get the electrician to wear a neutral wire. The principle is very simple. Any smart device needs to have zero live line power to work. It can be installed without the zero line, but the stability of the zero line is higher.

2. Use non-metallic bottom box

The metal back box will shield the signal, ordinary 86 bottom box can be, try not to use the bottom box is too shallow, 6 cm and above the depth of the bottom box is certainly no problem, less than 5 cm, then the future may be compared to install Hard work.

3. It is recommended to use up to two loops per switch (keys)

From the operating experience point of view, the two loops are much better than the three loops or even the four loops. The buttons of the three loops are too small and the operation is very laborious. If there are 3 circuits in a single room, two switches can be installed. If you have already made three loops, you can install them, and you can combine two of them into one.

4. It is recommended to leave the lamp with a slot

After leaving the lamp with a slot, you can install a color light. The color light can change color with music or TV.

5. Bathroom installation sensor lights

The sensor lights in the bathroom, aisle, and kitchen can now be installed. With sensor lights, no manual switching is required anymore. People will automatically light up when they enter.

Second, electric curtains

After installing the electric curtains, it is not to switch the curtains remotely, but to automatically open and close the curtains, automatically close the curtains before going to bed, and automatically open the curtains when the weather is good. In order to realize these beautiful visions in the future, first notice the following: Some points:

1. Add five-hole socket on the curtain rail head, one side can be installed;

2. There is a curtain box (ceiling) Note that the width of the single curtain curtain box is at least 10cm, the minimum of the double layer is 15cm, and the top of the curtain box is doubled with a large gold plate to prevent noise.

In the same way, electric windows can also be installed to automatically open and close the windows according to the indoor and outdoor air quality. If you want to install it, you can leave power on the window first.

Third, smart toilet

The smart toilet is more and more widely accepted, and installation requires attention to these minor issues:

1. Reserve water outlet

Nowadays, many new buildings have two types of water: tap water and medium water, and reclaimed water is recycled water. It is specifically designed to flush toilets. The consequences of misuse of water can be imagined. If you want to know that there are several kinds of water in your home, you can see that there are several water meters in your house. The charges for the two types of water are different.

2. Reserve five-hole socket, requiring waterproof, splashproof, with ground.

3. Reserve a 5cm diameter ventilation duct for toilet odor.

Fourth, air purification system

Now that air pollution is getting worse, it can be affected even indoors. For the family's health, what we can do is purify the air in our own home. The air purification program mainly has the following three types:

Air purifier

This kind of equipment does not require reserving lines, and it can be used when it is bought and plugged in. However, there is a disadvantage in that the air in the room can only be circulated and cannot be circulated with outdoor air, which may cause the indoor carbon dioxide concentration to be too high.

2. Wall style

The fresh air system is to purify the outdoor air and input it into the room. This new air purifier is better than an ordinary air purifier, and the price is more expensive, but the average family can accept it. If it is installed, it must be drilled in the wall. Set yourself, it does not affect the appearance, do not forget to leave power in the installation location.

3. Professional fresh air system

This type of system consists of ventilators and ducts. There are outlets and exhausts. The rooms need ceilings. The purifying effect is the best. Of course, it is also the most expensive. Generally, the villas will be installed. The impact of air pollution is becoming more and more serious. In the future, this kind of system may also go into the homes of ordinary people.

V. Security video surveillance

There are two main uses for video surveillance. One is to look at children and the other is to prevent burglars. It is recommended that children be installed in the children's room and right at the entrance door. Try not to install them in the living room and bedroom. Leave the power supply where you need it. Pay attention not to backlight.

Six, audio and video system

Students who like to watch movies can install audio-visual systems in the living room and surround sound effects to kill all independent sounds.

Video program can choose to stay only TV; TV and projector with (usually watching movie with electric projection screen); conditional can look up the laser TV.

Related browsing

Article : Smart home building materials are quickly entering the lives of the general public

Recommended : Smart Home Development Smart Home Status Voice Smart Home