Recently, the “Energy Saving Lamp Quality Inspection Report and Strengthening Industry Self-discipline Work Conference†was held in Zhongshan City, Guangdong Province. At the meeting, the State Administration for Industry and Commerce announced the results of the spot check on the quality of energy-saving lamps in 2006. Among the 61 batches of products examined, the product qualification rate was only 39.3%. Even the energy-saving lamp products including some well-known enterprises also had many problems. Such results have caused strong repercussions in the industry and society. In this regard, the China Lighting Association has given high priority and communicated with the State Administration for Industry and Commerce in a timely manner to study the rectification plan.
It is reported that this meeting was co-sponsored by the Consumer Protection Bureau of the State Administration for Industry and Commerce, the China Consumers Association and the China Lighting Association. More than 150 representatives from more than 80 energy-saving lamp manufacturers in Shanghai, Zhejiang, Jiangsu, Fujian and Guangdong provinces attended the meeting.
At the meeting, Lu Yangang, deputy director of the Consumer Protection Bureau of the State Administration for Industry and Commerce, pointed out that the quality problems of energy-saving lamp products in the domestic market should be paid attention to by enterprises and industries, and problem enterprises should increase supervision and spot checks on the quality of energy-saving lamps. To create a harmonious and honest market environment for consumers. He also said that the administrative department for industry and commerce will strengthen cooperation with industry associations and other departments to help enterprises improve the quality management of the market.
Wang Qianhu, director of the complaints department of the China Consumers Association, compared the test results of two energy-saving lamps. He said that the quality inspection results of energy-saving lamps have not improved significantly in the past two years. This is a problem that manufacturers should attach great importance to. With the awareness of energy conservation deeply rooted in consumers, consumers will pay more and more attention to energy-saving lamp products. Manufacturers must provide qualified products to consumers in the principle of good faith, and truly save electricity and save money.
At the meeting, Chen Yansheng, chairman of China Lighting Association, introduced the current market development trend of energy-saving lamps at home and abroad and the production and export of energy-saving lamps in China. He said that Chinese companies are fully capable of providing products that meet market demand abroad. It is hoped that the energy-saving lamp manufacturers will strengthen self-discipline and provide more energy-saving lamp products to the market through various methods such as technological improvement and management.
Yang Zheng, director of the National Electric Light Source Quality Supervision and Inspection Center, introduced the test data from two spot checks and the analysis of unqualified samples, and introduced the main reasons for product failure and suggestions for improving product quality.
At the same time, Chengdu Jinfu Lighting City, as a representative of the circulation field, said that it is necessary to cooperate with the market supervision department, strictly control the market access, and consciously resist the entry of inferior products into the market and safeguard the legitimate rights and interests of consumers.
Finally, the participants passed the discussion on “Quality Self-discipline of Energy-saving Lamp Industryâ€. The specification was drafted under the active participation of some energy-saving lamp manufacturers and professional markets. At the meeting, the delegates discussed the content of the "normative", especially the quality conditions promised to the society, and after repeated revisions, reached a consensus and released it to all sectors of society. The delegates stated that they will consciously maintain product quality in strict accordance with the requirements of quality commitment and provide qualified energy-saving lamp products to consumers.
This meeting created a platform for full communication between the market supervision department and the production company. At the conclusion of the meeting, Zheng Shanai, deputy director of the Consumer Protection Bureau of the China Administration for Industry and Commerce, said that in the future, it will further strengthen communication with the China Lighting Association, give full play to professional features, better improve product quality supervision, and regulate the circulation market. Consumers create an environment of city letter.
1
| About PEW Enameled Aluminium Wire |
We product class 155 enameled aluminium wire from 2.65-6.0 mm.
According to the characteristics of motor, transformer, automotive electrical and high-speed winding machine, we have advantages in resilience, breakdown voltages and have imported machine to protect the quality of Enameled Copper Wire.
|
Name |
Enameled Aluminum Wire |
|
Conductor |
Aluminum |
|
Dimension |
Diameter(mm): 2.65 ~ 6.0 |
|
Thermal Class(℃) |
130(Class B); 155(Class F); 180(Class H); 200(Class C); 220(Class C+); |
|
Standard |
IEC; ISO9000; ISO9001; IATF16949 |
|
Packing |
PT4 – PT200 or ply-wood spool |
|
Application |
Transformer; motor; generator; modern instrument; welding machine and so on. |
Class 155 heavy insulation thickness of modified polyester enameled aluminum round wire
Wire Of Motor,Pew Enameled Aluminium Wire,Aluminum Wire For Coils,Enameled Clad Aluminum Wire
HENAN HUAYANG ELECTRICAL TECHNOLOGY GROUP CO.,LTD , https://www.huaonwire.com