Smart bracelets, as a more popular form of products in the past two years, have attracted more and more attention, and at the same time, some changes have taken place in the electronics market.
A smart wristband usually consists of a radio frequency circuit unit, a clock circuit unit, a memory circuit unit, a sensor circuit unit, and a master MCU unit, and the circuit PCB is usually concentrated in a small range for single-sided or double-sided patches. The board is mainly 4 or 6 layers.
Since the versatility is concentrated on a small PCB board, we have to pay special attention to the layout and routing of the bracelet. Now, some considerations are summarized for reference.
PCB layout of each part of the PCB, pay attention to trace protection
As can be seen from the PCB board above, the various parts of the smart bracelet (different color box marks) have a good partition: since the smart bracelet is a collection of digital circuit components, as long as the circuit design is done With the matching resistor and capacitor distribution, the circuit module with certain functions can be completed, which makes the circuit design more concise and easy to find.
Although some sensor circuit units use analog circuit technology for data acquisition, once the module is designed as a module, data communication and information transfer can be completed through the corresponding connection interface.
In the layout of the circuit module, on the one hand, it is necessary to pay attention to the clock circuit and the crystal oscillator circuit to reach the target discipline through the shortest path. On the other hand, when the clock is routed, care should be taken to avoid the data line to prevent the interference from affecting the stability of the system.
When routing, it is necessary to protect the critical traces, such as the clock generation circuit, the crystal oscillator circuit, etc., whether to carry out copper protection, whether to carry out ring protection, etc., generally in the design will be protected, for the crystal part is required to dig copper .
Handling good RF circuits in PCB design
The smart bracelet needs to be linked with the mobile phone when it is used. Therefore, the radio frequency part is a key part. In this part of the design, special care must be taken. Nowadays, the smart bracelets on the market are nothing more than wireless data transmission based on Bluetooth, so the focus is on the processing of Bluetooth radios.
If the smart bracelet is only used for data transmission without the need to transmit sound and music, then low-power Bluetooth is the best choice. At design time, the shape of the Bluetooth antenna, the antenna layout, the smart bracelet shell material, etc. all affect the intelligence. An important factor in the performance of the bracelet. An excellent RF antenna engineer is particularly important in the smart bracelet PCB design process.
Do ESD protection design
Different countries and regions have different standards for different products or the same product ESD requirements. In order to pass the relevant tests, ESD protection design should be carried out at the time of design. After the design is completed, ESD testing should be carried out to ensure the passing of products. Adapt to electronic testing in the local market.
Reserved system upgrade interface
Whether the upgrade of a smart bracelet is convenient or not is very important for users or smart fans. If a product is upgraded at the appropriate time (probably the previous hardware design to some functions and not catch up with the market software, it may also be a bug in some software), which means the product is still non-stop. This is a good psychological compensation for the user during the development process. There are usually two ways to upgrade a smart bracelet software: via USB interface and wireless push. As for which method to use, it needs to be determined in the early planning and hardware and software planning.
LED Bluetooth Speaker Feature:
1. Polyethylene (PE) is a kind of thermoplastic material, not easy to broken, suitable for long time delivery
2. Non toxic, safe for human healthy
3. Rechargeable battery and remote control
4. Multi-colors change & color selection
5. Anti UV & waterproof
6. Adopt the EPISTAR led chip to ensure the color quality and life time
7. Certificate: CE, ROHS, etc
8. Warranty: 1 year
Bar, nightclub, golf club, disco, KTV, bistro, patio, pub, hotel, restaurant, cafe, coffee shop, tea house, plaza, garden, entertainment park, amusement park, home, villa, swimming pool, wedding, party, events, decoration, design, project, rental/hire.
Led Cube Speaker,Led Lamp Speaker,Led Bluetooth Speaker,Led Cube Bluetooth Speaker,Ice Bucket&Led Bluetooth Speakers
KIWA ELECTRONIC (HK) INDUSTRIES CO.,LTD , https://www.kiwahk.com