Title: LED Screen Project Procurement Announcement Tender No.: HN(X)2009-0065 Announcement Date: May 21, 2009 Deadline: May 25, 2009 Tendering Agency: Minnan New District Finance Bureau Province: Liaoning Province - Shenyang City Content: The Government Procurement Center of Hunnan New District of Shenyang City was entrusted by the Finance Bureau of the Weinan New District (purchasing person) to inquire about the government procurement project of Hunnan New District of Shenyang City (Project No. HN(X)2009-0065) Price (negotiation, bidding) procurement, welcome the relevant bidder to make the most favorable quotation document for the purchaser ( quotation file can be downloaded), and the document (one original, one copy) ), sealed before 09:00 on May 25, 2009 (all seals should be sealed and stamped) and submitted to the Administrative Committee of No. 3, Century Road, Hunnan New District, Shenyang (the west side of 21st Century Building) In the special bidding cabinet on the east side of the 9th floor of the new office building, and submit the bidding documents to the registration form. Specific requirements are as follows:
1. Technical requirements and quantity of equipment: See attached table for details.
2. Delivery time: Within 1 day after the contract is signed (tentative).
3. Place of delivery: Within the territory of Shenyang (purchasing person).
4. Payment method: The “Government Procurement Project Acceptance Report†and the project acceptance list signed and stamped by the purchaser after the goods are installed and debugged, and the project acceptance list is entrusted by the Shennan New District Purchasing Office of Shenyang City to pay the contract price as required. .
5. All quotations are quoted in RMB (unit: yuan). The quoted price includes the unit price, total price, freight cost of the required equipment, and the technical training service fee necessary for the purchaser to operate and maintain normally.
6. The price of the quoted price is valid from the date of May 20, 2009 (30).
7. The winning result of the project will be announced in the winning bid information on this website.
8. Please attach the following business documents at the same time as the quotation:
(The quotation documents submitted by the bidding supplier shall contain at least the following contents and must be stamped with the official seal. Please bind the book in the order of A4 paper size. Otherwise, there will be a risk that the bid documents will be rejected. In duplicate, the annual inspection is required. The documents must clearly reflect the annual inspection records; if there is a false cancellation of bidding qualifications and accountability)
(1) Tender letter (see Annex 1 for the format) (Note: Legal persons must sign or seal, and the bid documents can be valid)
(2) Proposal quotation form (see Appendix 2 for the format, the fastest delivery time must be clearly listed and each page must be signed by the legal representative or its authorized agent)
(3) Technical clause deviation table (see Annex 3 for the format)
(4) Legal representative qualification certificate (see Annex 4 for the format)
(5) Power of attorney for legal representative (see Appendix 5 for the format, must be available when the representative of the illegal representative is signed)
(6) Technical documents (text materials, color pages, data, drawings, manuals, inspection reports, etc.)
(7) A copy of the business license (has passed the annual inspection, requiring a clear reflection of the annual inspection record and business scope)
(8) Copy of tax registration certificate
(9) Copy of bank account opening permit
(10) Certificate of authorization or distribution issued by the manufacturer (agent must provide)
(11) Quality Assurance and After-sales Service Commitment (see Annex 6 for the format)
(12) If the other qualification documents are required, the project manager will notify you separately.
9. If the bidder's quotation is accepted, we will notify you immediately and the winning bidder must sign the purchase contract with the purchaser within 7 working days, and please copy 2 copies of the invoice; if not accepted, we will You are welcome to continue to work with us.
Product serial number: HN(X)2009-006501
Product Name: LED screen
Technical specifications: LED: pixel point diameter p16; color single red; transmission distance (five types of cable) less than 100m; playback content single red text; ambient temperature -35 ° C -55 ° C; unit board installation method before the volt (magnetic adsorption ); unit board production process reflow soldering machine chip type; the best viewing distance is 3~30m, the display content is clearly visible; the whole screen brightness uniformity has no obvious mosaic phenomenon; the scanning mode is 16 scanning; the scanning speed is greater than 240Hz; the communication mode RS232 & 485 serial port Communication; discrete out of control points; continuous out of control points; relative humidity 10%-65% RH; power supply voltage 220V ± 10%; life period is more than 100,000 hours; maximum power 240W / m2; flatness full screen: ± 1mm ​​module room Patchwork: ; unit board size 606┨×245┨ or 485┨×245┨. 0.84m*9m, one; 0.8m*0.9m, one.
Quantity: 2 Company Name: Government Procurement Center, Hunnan New District, Shenyang Contact: Chen Ying Tel: 024-23787715, 23786059 E-mail: Fax: Postal Code: Address:
1. Technical requirements and quantity of equipment: See attached table for details.
2. Delivery time: Within 1 day after the contract is signed (tentative).
3. Place of delivery: Within the territory of Shenyang (purchasing person).
4. Payment method: The “Government Procurement Project Acceptance Report†and the project acceptance list signed and stamped by the purchaser after the goods are installed and debugged, and the project acceptance list is entrusted by the Shennan New District Purchasing Office of Shenyang City to pay the contract price as required. .
5. All quotations are quoted in RMB (unit: yuan). The quoted price includes the unit price, total price, freight cost of the required equipment, and the technical training service fee necessary for the purchaser to operate and maintain normally.
6. The price of the quoted price is valid from the date of May 20, 2009 (30).
7. The winning result of the project will be announced in the winning bid information on this website.
8. Please attach the following business documents at the same time as the quotation:
(The quotation documents submitted by the bidding supplier shall contain at least the following contents and must be stamped with the official seal. Please bind the book in the order of A4 paper size. Otherwise, there will be a risk that the bid documents will be rejected. In duplicate, the annual inspection is required. The documents must clearly reflect the annual inspection records; if there is a false cancellation of bidding qualifications and accountability)
(1) Tender letter (see Annex 1 for the format) (Note: Legal persons must sign or seal, and the bid documents can be valid)
(2) Proposal quotation form (see Appendix 2 for the format, the fastest delivery time must be clearly listed and each page must be signed by the legal representative or its authorized agent)
(3) Technical clause deviation table (see Annex 3 for the format)
(4) Legal representative qualification certificate (see Annex 4 for the format)
(5) Power of attorney for legal representative (see Appendix 5 for the format, must be available when the representative of the illegal representative is signed)
(6) Technical documents (text materials, color pages, data, drawings, manuals, inspection reports, etc.)
(7) A copy of the business license (has passed the annual inspection, requiring a clear reflection of the annual inspection record and business scope)
(8) Copy of tax registration certificate
(9) Copy of bank account opening permit
(10) Certificate of authorization or distribution issued by the manufacturer (agent must provide)
(11) Quality Assurance and After-sales Service Commitment (see Annex 6 for the format)
(12) If the other qualification documents are required, the project manager will notify you separately.
9. If the bidder's quotation is accepted, we will notify you immediately and the winning bidder must sign the purchase contract with the purchaser within 7 working days, and please copy 2 copies of the invoice; if not accepted, we will You are welcome to continue to work with us.
Product serial number: HN(X)2009-006501
Product Name: LED screen
Technical specifications: LED: pixel point diameter p16; color single red; transmission distance (five types of cable) less than 100m; playback content single red text; ambient temperature -35 ° C -55 ° C; unit board installation method before the volt (magnetic adsorption ); unit board production process reflow soldering machine chip type; the best viewing distance is 3~30m, the display content is clearly visible; the whole screen brightness uniformity has no obvious mosaic phenomenon; the scanning mode is 16 scanning; the scanning speed is greater than 240Hz; the communication mode RS232 & 485 serial port Communication; discrete out of control points; continuous out of control points; relative humidity 10%-65% RH; power supply voltage 220V ± 10%; life period is more than 100,000 hours; maximum power 240W / m2; flatness full screen: ± 1mm ​​module room Patchwork: ; unit board size 606┨×245┨ or 485┨×245┨. 0.84m*9m, one; 0.8m*0.9m, one.
Quantity: 2 Company Name: Government Procurement Center, Hunnan New District, Shenyang Contact: Chen Ying Tel: 024-23787715, 23786059 E-mail: Fax: Postal Code: Address:
Wholesale vape 1500 puffs resale online.Bulk buy 1500 puffs Disposable Vape from Chinese suppliers with whloesale price on tsvaping.com. Puff Bar Xtra Disposable Device Vape Pen Starter
Iget plus 1200 Puffs Disposable 10 Pack. 6% Nicotin level. Wholesale E-cigarette Fume Extra 1500 Puffs Disposable Vape.
China Wholesale Vape 1500 Puffs Popular Seller Fume Extra Disposable Electronic Cigarette, Find details about China E Cigarette.
Vape 1500 Puffs,Vape Puffs,Flash Vapes 1500,Disposable Vape Stick
TSVAPE Wholesale/OEM/ODM , https://www.tsecigarette.com