Less than one year after the SMZDM was removed, it had learned a lot of new things, or had a new understanding of many things, such as the “label printer†that was repeatedly pushed. In the past, I just thought that this thing was used by the supermarket to play a small ticket, but please take a look at the introduction of Xiaobian Lili.
The label printer can be used for label printing in various situations such as document management, warehouse management, cable identification, assembly line equipment identification, and asset management. It is suitable for office use and can be used for home sorting and storage. It has its own personality attached to personal objects. Labeling is a very cool thing.
So in my heart, I would like to own a label printer. The magic of Xiao Bian is huge, but I haven't waited until the price cuts. . Just mobilized my job and I needed one. So I went straight to Meyer's Brother Brothers QL-700. I came.
.
Xiao Bian recommended link "Reduce Price: Brother Brothers Pluck QL-700 Professional Label Printer Thermal Speed ​​$25.99 (approx. ¥320) Instant Price Rise! ~" Well Cheaper, When I Buy It Is 64 Knives ! It has twice as much, and it does not inherit the spirit of worth buying.
Not much to say, I bought a "Brother Brother QL-700 Computer Label Printer" in the Brothers series of "thermal printing" is different from the generic paste thermal transfer.
"First, different supplies:
Thermal consumables used: thermal paper; (The thermal paper quality is similar to the bar code printed out in supermarkets, I believe we have seen); thermal printers can only use dedicated thermal paper, thermal The paper is coated with a layer of coating that reacts with heat and discolors, similar to a photographic film, but this layer of coating discolors when exposed to heat. This feature of the heat-sensitive coating produces thermal printing. technology.
Consumables used in thermal transfer barcode printers: label paper, PET, PVC, water mark, tag, and other label media, and can also be printed using thermal paper;
Second, the length of shelf life is different:
Label paper shelf life: The media printed by the thermal printer does not last long, generally half a year! (Specifically depends on the storage location, luminosity, temperature and other circumstances determine the actual shelf life)
The media printed by the thermal transfer machine has a longer storage time, generally more than two years (depending on the quality of the label and ribbon used)
Third, the scope of application is different:
Applicable place: Heat-sensitive machine: supermarkets, clothing stores, logistics, retail and other companies that do not require high bar code;
Heat transfer machines: manufacturing, automotive, textile, telecommunications, food, electronics, chemical, pharmaceutical, medical, utilities, retail distribution, transportation and logistics, government agencies, and other companies;
Fourth, the cost varies:
Cost comparison: The cost of thermal machines is lower, and consumables are also lower; thermal transfer machine costs, consumables costs are higher than the cost of thermal machines;
However, Brother's thermal paper is said to be able to save 5 years, it seems to be enough. Do not worry too much about the length of the film and the lifespan. This tag was originally used for temporary things.
If you do not have the sun drying, you can refer to another valued friend's drying sheet “Multi-Recommended Label Printer - Brother Brother QL710W Wireless High Speed ​​Label Printerâ€
The key experience began and it was really sharp.
First of all, let's take a look at the comments on the singes and the comments in this recommendation. Everyone is in full swing discussing how to change the voltage is easy and simple, the basic way: 1. After-sales manufacturers, 2. Electrical repair shop, 3. Simple to change their own. Let me DIY this little heart beating. In this regard (mai) is determined (xia) (huo) heart (gen) himself.
Secondly, two 400V220UF electrolytic capacitors have been placed on Taobao before getting it.
As all of you said that space is enough, convenient, and even disinterested to write experience, so I also bought two casually, helpless, ah, no time to go to the electronic mall, freight can not afford to hurt ah.
Third, we prepared the following tools: electric iron, rosin, solder wire, wire cutters, tweezers, screwdrivers, and mobile phones.
The inner plan is to open → remove the power module → solder the original capacitor → solder the new capacitor → cut the pin → restore → get it.
Fourth, start with the concept:
Open the back cover and smoothly
MADE IN CHINA good thing, there is design position of the back cover, one side of the two sales
2. The power cable is close to the top. The top should be the power module, but how is this power module so complicated? ? 200V220UF capacitor how could not find, is it below? Nine cattle two tigers apart, I rub. The following is the power module.
3. Welded under the original capacitor, silly, these two capacitors are so much smaller, ah, this space is not a wild thing, is simply a cubicle.
The maximum diameter of this capacitor is 25, and the maximum straight line height is 32. So this I can't buy it at all. There is no problem with the capacitance of 220UF 105°C.
4. The following question is how to put this big stuff into it. First of all, look for something smaller on Taobao. The size is just right. You see this, 2530. It seems to be almost ah. It comes first. It is freight and time. what.
After the arrival, the contrast map, this is a horn, ah, different hole spacing, and there is no lead on Taobao, are horns. There is temperature and forget to read, this is 85 °C.
5. Or take the first change, and be impatient, look for space again, find it barely put in the middle of the circuit board, so it becomes like this.
6. It should be OK this time, and it will not be powered on. Re-opened, the fuse burned, and then the capacitor, and then reversed, the corresponding gray pin of the capacitor is positive, there are marks on the circuit board, to be aligned. Tears of blood, electronic idiots are such foolishness.
7. Switching capacitors, can't wait to buy insurance, take a line to take a risky jump, and turn it on, OK.
8. Due to capacitance limitations, this screw has not been screwed to the end. However, it should not have much impact.
to sum up:
There is no comparison of print results, so it is not clear.
The consumables are very good to buy, but there is no comparison, so we do not know it is not cheap. Consumables can refer to the official website:
(Hey ~ Hello ~ Hello, you don't know this, what counts?)
When the printer automatically cuts the label, the printer flies the label. I don't know if everyone is like this. How old do I feel about it?
Renovation section:
1) It's best to find a capacitor of the right size. It's best to compare it to the electronic city.
2) Do not forget the positive and negative poles.
3) It is impossible to use lead wire.
4) Still looking for a professional may be better, but it's more fun to do it yourself.
-Finish-
Thank you for watching. Just now, just now, the company gave me a QL580N. I'm going to go. Then I'm not wasting. Who needs this QL700, which I have opened, thank you, thank you, Aunt Zhang.