steel electric transmission tower power distribution pole
Specification introduction
steel electric transmission tower power distribution pole
| Type | Electric power pole, |
| Usage | Electricity distribution |
| Shape | Conical ,Multi-pyramidal,Columniform,polygonal or conical |
| Material |
Usually  Q345B/A572,minimum yield strength>=345n/mm2    As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52 |
| power | 10 KV ~1000 KV as customer's need |
| Safety Factor | Safety factor for conducting wine : 8 Â Â Â Safety factor for grounding wine : 8 |
| Electroshock resistant protective grade | Grade  I |
| The casing anti-corrosion performance | Class II |
| Working atmosphere of lighting fixture | -35 ºC~+45 ºC |
| Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
| Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
| Wind Speed | 160 Km/Hour |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strengt | 490 mpa |
| Max ultimate tensile strength | 620mpa |
| Length of per section | Within 14m once forming without slip joint |
| Welding | We has past flaw testing.Internal and external double welding makes the welding beautiful in shape |
| Thickness | 1 mm to 30 mm |
Production Process
steel electric transmission tower power distribution pole
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Factory Show
Contact Us:Â
Tel:Â 86-532-83978013
Fax:Â 86-532-83978023
Mob: 86-15192600825
 Â
 Â
Material:
1. All of our material are purchased from famous mill factory to assure the quality.
2. AÂ mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
3. Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
Design and Details
1. Pole,base plate and under ground fixture can be specially made as required.
2.The product has many types , which can meet different requirements of consumers,but the price and some technical specifications can vary greatly.
3. All the photographs are for reference only,and the actual products may vary from the photographs.
4. Lofting and design software :We have steel pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly.
Â
Inspection:
1. Management team :Â We have employed years of experience engineers to take charge of the overall managemnt ,especailly the technical managemnt and quality management .
2. Introducing ISO management ,We are awared TUV CE UL certificate .Â
3. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore the shipment.
Service:Â
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. 4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory :Â We are manufacturer, specializing in producing all kinds of steel poles for more than 15years, competitive with good quantity.
7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.
If you are in need of our products, you may let us know and we will offer you good products with great quality and service.FAQ:
Q1. Do you have any MOQ limit for lighting pole order?
 A: Yes, MOQ: 1pcs.
Q2. How to proceed an order for electric pole ?
A: Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Q3. Is it OK to print my logo on led lighting pole product?
 A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q4: Do you offer guarantee for the products?
A: Yes, we offer 15 years warranty to electric poles.Â
Q5: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation. Yangzhou Borui Electric Lighting Co., Ltd.
steel electric transmission tower power distribution pole
Specification introduction
steel electric transmission tower power distribution pole
| Type | Electric power pole, |
| Usage | Electricity distribution |
| Shape | Conical ,Multi-pyramidal,Columniform,polygonal or conical |
| Material |
Usually  Q345B/A572,minimum yield strength>=345n/mm2    As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52 |
| power | 10 KV ~1000 KV as customer's need |
| Safety Factor | Safety factor for conducting wine : 8 Â Â Â Safety factor for grounding wine : 8 |
| Electroshock resistant protective grade | Grade  I |
| The casing anti-corrosion performance | Class II |
| Working atmosphere of lighting fixture | -35 ºC~+45 ºC |
| Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
| Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
| Wind Speed | 160 Km/Hour |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strengt | 490 mpa |
| Max ultimate tensile strength | 620mpa |
| Length of per section | Within 14m once forming without slip joint |
| Welding | We has past flaw testing.Internal and external double welding makes the welding beautiful in shape |
| Thickness | 1 mm to 30 mm |
Production Process
steel electric transmission tower power distribution pole
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Factory Show
Contact Us:Â
Tel:Â 86-532-83978013
Fax:Â 86-532-83978023
Mob: 86-15192600825
 Â
 Â
Material:
1. All of our material are purchased from famous mill factory to assure the quality.
2. AÂ mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
3. Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
Design and Details
1. Pole,base plate and under ground fixture can be specially made as required.
2.The product has many types , which can meet different requirements of consumers,but the price and some technical specifications can vary greatly.
3. All the photographs are for reference only,and the actual products may vary from the photographs.
4. Lofting and design software :We have steel pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly.
Â
Inspection:
1. Management team :Â We have employed years of experience engineers to take charge of the overall managemnt ,especailly the technical managemnt and quality management .
2. Introducing ISO management ,We are awared TUV CE UL certificate .Â
3. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore the shipment.
Service:Â
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. 4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory :Â We are manufacturer, specializing in producing all kinds of steel poles for more than 15years, competitive with good quantity.
7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.
If you are in need of our products, you may let us know and we will offer you good products with great quality and service.FAQ:
Q1. Do you have any MOQ limit for lighting pole order?
 A: Yes, MOQ: 1pcs.
Q2. How to proceed an order for electric pole ?
A: Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Q3. Is it OK to print my logo on led lighting pole product?
 A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q4: Do you offer guarantee for the products?
A: Yes, we offer 15 years warranty to electric poles.Â
Q5: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
New Products
SHENZHEN CHONDEKUAI TECHNOLOGY CO.LTD , https://www.szsiheyi.com