How to clean a digital camera?

Most digital cameras cannot install protective filters or are inconvenient to install. It's easy to accidentally get dust, press a fingerprint or leave something saliva when you are shooting the camera. Although fingerprints, dust, and water marks on the lens surface do not have much effect on imaging. As long as it does not allow strong sunlight to hit the lens, it will cause fog and glare. But how can you, who loves cameras, tolerate the beloved camera lens into a big face? What to do if it is not clean? Rub it!

1, first blow the dust with a blower balloon, individual blown away with the lens paper carefully ticked off, we must be careful, do not use force. Take a little absorbent cotton, wet with lens water, wet it well, and carefully stick to the dust and stains still on the lens.

2, first prepare a small number of cotton balls (with wet lens paper can also be) a number of pressed all into a cake, the size of one third of the mirror is appropriate. Prepare a large number of large cotton balls, also pressed into a cake, the size of the mirror two-thirds to three-quarters is appropriate, try not to expose cotton fibers on the work surface.

3. Use a small cotton ball to dip the lens water and do a good job. Sweep the mirror with the spiral from the center and don't go back to the road. Then, when the lens water is not dry, wipe the mirror in the same way with a big cotton ball. If one effect is not satisfactory, you can come in once, but the used cotton ball should not be used again.

4, if there is no lens water how to do? It does not matter, you can use the gas toward the lens surface instead. However, it must be noted: Do not cover your mouth when you are angry, you should open your mouth, gently gas, so as not to spit. We just have a mist on the lens surface.