101A electric blast drying oven - Database & Sql Blog Articles

product name:

101A

Electric blast drying oven

I. Overview

The maximum working temperature is

300 ° C

, using digital display temperature controller to control temperature. Clear and eye-catching, significant heating rate

,

It is easy to operate and is suitable for papermaking, packaging, medical and health, colleges and laboratories, workshops or laboratories. It is an ideal drying equipment.

101-A

The outer casing of the drying oven is made of thin steel plate, the outer surface is lacquered, and the outer shell and the inner tank are filled with aluminum silicate fiber to form a reliable insulation layer. The heaters are installed at the bottom of the studio, and a set of heaters is used to manage the power on and off.

101A

Type with blast

Second, the method of use

1

,

This type of oven should work indoors and be installed smoothly.

2

,

The power input should be a dedicated front-end on/off switch and a good ground wire.

3

,

The power supply, voltage, and power supply wiring must be checked before being powered on.

4

,

When it is newly purchased or used for a long time, it should be baked at low temperature first.

80-100 ° C

After two hours, the temperature will rise again to facilitate the leakage of moisture, enhance the insulation performance and extend the life of the porcelain.

5,

The instrument temperature-controlled thermal element probe should be inserted into the working chamber from the temperature measuring hole on the left line, and should not be inserted from the center hole of the box top valve to avoid affecting the use.

6,

When the drying box is used for the first time, please observe it carefully to avoid overheating and drying the workpiece and causing loss.

7,

If you feel that the heat is slightly larger, you can turn off a group of heaters to reduce the heating power and prevent the overheating caused by excessive inertia.

8,

Take in the baked goods: Do not hit the temperature control part of the studio to prevent damage to the temperature control unit.

9

,

In case of failure, please consult a professional electrician.