According to the notice issued by the Jiangsu Provincial Department of Finance and the Science and Technology Department of Jiangsu Province on the 12th batch of provincial-level scientific and technological innovation and the transformation of achievements (significant scientific and technological achievements), Xin Najing is based on nano-patterning The project of high-efficiency LED epitaxy, chip research and development and industrialization at the end was included in the 12th batch of special funds for the transformation of scientific and technological innovation and achievements (transformation of major scientific and technological achievements) in Jiangsu Province in 2012, and received government subsidies of 13 million yuan.
It is reported that the main research and development content of the project is to design and optimize the new substrate nano-pattern structure by optical simulation method; develop nano-pattern substrate continuous imprint technology; improve and optimize LED epitaxy, chip and package on sapphire pattern substrate Technology, etc.
According to the "Notice on the Release of the 5th Batch of Science and Technology Development Technology (Technology Special Project) Project of Suzhou City in 2012, according to the Suzhou Science and Technology Bureau and the Suzhou Municipal Finance Bureau, Xin Najing" is based on nano-patterned substrate for efficient LED lighting. The chip research and development project was included in the fifth batch of science and technology development plan (technical special project) of Suzhou City in 2012, and received government subsidies of 2 million yuan.
The main content of the project is dedicated to the structural design of NPSS substrate, NPSS substrate continuous nanoimprint technology research, GaN epitaxial growth technology research, high brightness and high yield LED epitaxial wafer growth technology research. After the completion of this project, the LED chip luminosity can be increased by 30% to 170 lm/W, and the cost can be effectively reduced by 15%.
Antenk box header connector,Those products are used in more or less every known application within computer-, industrial-, telecommunication and specific automotive markets. This product technology allows cost effective connections between printed circuit boards based on removable or permanent connections based on a longterm proofed way of assembly. box header connectors are available with the traditionally used pitch of 2.54mm and the pitch of 2.00mm,1.27mm.
Antenk Box header/Ejector header Description and Application:
Box header/ ejector header connector, With DIP straight/vertical, SMT,Right angle, 2.54pitch, 2.0pitch, 1.27pitch,
The commonly used Pin ways have 6P,8P,10P,14P,16P,20P, 24P,26P,30P,34P, 40P,50P,64P.
Box header/ ejector header and IDC Flat Cable connectors are two of the most commonly used connectors. Box headers can be found in nearly all electronic equipments.
This is a IDC product which allows cost effective connections between circuit boards based on permanent connection (using transition connector) or removable connection
(Using for IDC flat cable connectors).
Box header
Ejector header
Box Header,Box Header Connectors,Ecu Box Header Connector,Latch Box Header Connector,1.27mm Box Header Connector,2.00mm Box Header Connector,2.54mm Box Header Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com