Features:
Easy paper loadingÂ
Auto cutter
Printing speed : 220mm/s
Wear life: more than 100km
Introductions:
1. Low voltage supply
The voltage used to drive the thermal printer head is equal to the logic voltage, or is driven by a 5 V single power line, the range of operating voltage is 24V.
2. Compact and lightweight designÂ
The mechanism is compact and light, dimensions: 116.7mm (width) * 66.25mm (depth) * 25.8mm (height)
3. Printing with high resolution
A high-density printer head of 8 dots/mm make the good printing quality
4. High speed printing
According to driving power and sensitivity of thermal paper, set different printing speed required. Printing speed is 220 mm/ s(max.)
5. Easy paper loading
Detachable rubber roller structure makes the paper loading easier
6. Low noiseÂ
Thermal line dot printing is used to guarantee low noise printing.
Specifications:
| Print method | Thermal dot line printing | |
| Dots per line | 640 dots | |
| Resolution | 8 dots/mm | |
| Print width | 80mm | |
| Paper width | 79.5 ± 0.5mm | |
| W*D*H | 116.7*66.25*25.8mm | |
| Printing speed | Max. 220 mm/s | |
| Heater element pitch | 0.125mm | |
| Paper feed pitch | 0.125mm | |
| Head temperature detection | Via thermistor | |
| Out-of-paper detection | Via photo interrupter | |
| Head-up detection | Yes (Mechanical switch) | |
| Life span (at 25ºC and rated energy) | Pulse activation | 100 million pulses or more (print ratio=12.5%) |
| Abrasion resistance | 150 km or more | |
| Cutter life | 500,000cuts | |
| Operating temperature range (ºC) | 0~50 | |
| Operating humidity (RH) | 20%~85% | |
| Storage temperature range (ºC) | -20~+60 | |
| Storage humidity(RH) | 5%~90% | |
Applications:Â
POS printers
Self-service terminals/vendor/lining machine
Parking system
Kiosks
Gaming and lottery
Ticketing
Voting
Workshop:
Disclaimer: All trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks.
An aerial cable or air cable is an insulated cable usually containing all conductors required for an electrical transmission system or a telecommunication line, which is suspended between utility poles or electricity pylons. As aerial cables are completely insulated there is no danger of electric shock when touching them and there is no requirement for mounting them with insulators on pylons and poles. A further advantage is they require less right of way than overhead lines for the same reason. They can be designed as shielded cables for telecommunication purposes. If the cable falls, it may still operate if its insulation is not damaged.
As aerial cables are installed on pylons or poles, they may be cheaper to install than underground cables, as no work for digging is required, which can be very expensive in rocky areas
10kv Aerial Insulater Cable, Aerial Insulated Cable, Overhead Power Cables
Hebei Huanya Cable Co.,Ltd , http://www.hbhycable.com