Grinding machine use and use method - Database & Sql Blog Articles

Single chip microcomputer STM32L151CCU6

MOS power IC full range

Mobile phone crystal 3.2*2.5mm 3225 26M (26.000MHZ) 7.5PF 10PPM 20PPM 30PPM

SMD aluminum electrolytic capacitor

Grinding machine use and use method

Grinding machine use:

It is specially designed for rubber factories and scientific research units to grind rubber test pieces to a certain thickness for testing by other test equipment. It is one of the indispensable equipment for testing rubber quality. It is mainly composed of the main components such as the carriage feed carriage, work wheel, vacuum cleaner, electric motor and grinding wheel. The two types of grinding wheels, which are thick and thin, are formed at the same time, and have the characteristics of one machine and two machines. This product is easy to use, saves time, improves work efficiency, and is safe and reliable.

Grinder

Instructions

l. Move the small handle to open the knurled eccentric ball, clamp one end of the rubber test piece, and then press the other end of the test piece counterclockwise and press the movable pressure stick along the working wheel.

2. Start the motor and turn the grinding wheel in the direction indicated by the front.

3. Shake the handle so that the upper carriage is fed along the lower rail, and the dial is equipped with a dial of 0.02 mm.

4. The safety device is installed in the handwheel. The handwheel can only be turned counterclockwise, otherwise excessive force will damage its safety device.

5,

Grinder

When working, it should be coarsely ground and then finely ground.

Grinder

maintenance

l If the thickness of the ground test piece is found to be uneven and uneven, check whether the plane of the grinding wheel is parallel.

2. If the grinding wheel is found to be out of round, use a cutter to correct the plane.

3. Regularly add lubrication surface to the working surface of the pallet to keep it working properly.

4, often adjust the gap between the nut and the screw.

5, the machine is installed in an environment without vibration and no source of corruption

Grinder

Technical Parameters

I, grinding wheel line speed: 12 m / s

2, grinding wheel specifications: G60APRI170*40*3236

G60APRI170*40*3280 tablets

3, power supply voltage: three-phase 380V

4, working size: diameter 160 mm * 44 mm, center height 214 mm

5, the work wheel stroke: 20 mm

6, clamping sample size: length greater than 260 mm

Width up to 36 mm

Thickness up to 8 mm

7, dimensions: 55

0×

50

0×

900

8, net weight: 80 kg