1, first look at the back of the router has an ip management address, and then write down. Generally it is 192.168.1.1
How to connect Ethernet to its operation steps
2. Connect the router and computer with a network cable. Modify the ip to modify the image as shown in the figure.
3, open the web page to enter 192.168.1.1
4, enter the user name and password The general default username and password is admin Click to login to enter the interface
5. After entering the interface, the setup wizard will pop up automatically. Click Next to set it. If it does not pop up, click the navigation button of the setup wizard to proceed to the next step.
6. Click Next to enter the port. The general router has only 1 port. My enterprise router is 4 ports and can dial 4, so here we select 1 port.
7. Select it and click to enter the next step. There are generally three types of dial-up selection. Most of them need to select the first part of the broadband to choose the second and third.
8. Click to enter the next step to enter the dial-up account number and password input, click Next to dial, the dialing process will not wave well, click Retry, if you can't dial multiple times, you need to confirm the account and password. Correctness.
9. Click Finish to enter the system home page to see if the dialing is successful. The ip indicated by the arrow indicates that the dialing succeeds and the Internet is normal.
Guangdong Kaihua Electric Appliance Co., Ltd. , https://www.kaihuacable.com