[Home Theater Network HDAV.com.cn] People who are learning audio and recording are often half-dead by these different specifications of wire. They are half-dead and can't help but understand him, but it doesn't matter, we will explain the same now, but even if it is It is a common specification, and there are some specifications that must be known. I will use ※ to specify.
1, ADAT
The full name of ADAT is the abbreviation of Alesis Digital Audio. It is a fiber optic transmission line developed by Alesis. The more common use is for the transmission of A recording interface and another B recording interface, such as an 8-track configuration. ADAT's recording interface can be connected to an 8-track microphone preamp by ADAT, so you can upgrade to 16 tracks!
2, Fire-Wire
FireWire is also known as FireWire, and there is also the name of EEE 1394. In fact, it is all about the same thing. It is a specification developed by APPLE Apple. FireWire's early anti-USB wants to become a universal specification in the world, but unfortunately defeated in the specification war. Down, and in 2008 APPLE has announced that it will no longer be developed. Most of the early recording interfaces were FireWire and USB specifications, but with the generalization of USB 3.0 and the gradual disappearance of FireWire, there are few recording interfaces for the FireWire FireWire specification.
Below: FireWire FireWire Specification Recording Interface
3, USB ※
The full name of USB is Universal Serial Bus, which is a serial port bus standard for online computer systems and external devices. The picture shows USB Type B. The long shape is like a house. It is used to connect to the device. It is a recording interface and a main control keyboard.
4, S / PDIF
S/PDIF is developed by Sony and Philips. The full name is Sony/Philips Digital Interface Format. It is a digital transmission interface that can output audio to the decoder using fiber or coaxial cable output to maintain high fidelity. The output. Widely used in DTS and Dolby Digital.
5. XLR (Canon) ※
The XLR commonly known as the Cannon head is often used in microphones and recording equipment. If a condenser microphone is used, be sure to use an XLR-sized microphone to complete the power.
6, TS (6.3mm mono) ※
Commonly known as Phone Jack 6.3, or 6.3 connector, also known as 1/4 connector, the general purpose is the wire of the instrument, such as guitar, bass, keyboard can be used.
7, 3.5mm, 1/8, stereo / Stereo ※
The following picture is 3.5mm stereo, also known as 1/8 connector. The general purpose is the transmission line of the earphone, the desktop speaker transmission line, the microphone microphone for desktop chat, etc., because the equipment used in 3.5mm is mostly three-dimensional. The device, like the speaker has two sides, the earphone has two sides, so 3.5mm is generally a stereo design, we can judge the stereo from the black line at the front of the connector, there are two black lines to indicate stereo Stereo, if there is only one black line Mono MONO.
8, TRS (6.3mm stereo) ※
Like the above is Phone Jack 6.3, but stereo, we can judge from the front end of Phone Jack is mono or stereo, if a black line indicates mono, two black lines indicate stereo, often used for microphone The output of the keyboard is used.
9. RCA (Meihuatou) ※
In Taiwan, it is commonly known as plum head, or red and white joints (like some types of RCA joints, like plum petals), often used in general home audio equipment.
10, MIDI ※
The industrial standard established in 1991 is usually used for communication between the piano and the computer. Using a MIDI cable to connect the piano to the computer, the signals, strength, sustain pedal, etc. can be transmitted to the computer for the arrangement. , recording, writing, and so on.
After connecting the MIDI cable to the harpsichord and the computer, you can send a signal to the computer to start the arrangement and recording.
More fresh and fun home theater information, please pay attention to home theater network http:// (WeChat: cnhifi), the country's most influential home theater audio player interactive media website.
The utility model discloses an Electronic Cigarette with atomizer oil core separation structure, which comprises a atomizer assembly and a battery assembly; The utility model has the advantages of reasonable structure design and high practicability. During operation, because the oil storage tank of the atomizer is completely sealed and the oil guide material is completely isolated from the oil guide material, the oil guide material will never contact with the oil guide material in the storage process
Advantages:
Oil core separation, Mesh removable heating core, Ultra quiet design,100% oil leakage free, Excellent taste, Cost far less than the industry price.
A variety of colors and finishing are available, can be adjusted according to your market needs.
Oil Coil Separation Pod Patent,Oil Coil Separetion Vape Pod Oem,Innovated Vape Products Oem,Oil Coil Separation Vape Products Oem
Shenzhen MASON VAP Technology Co., Ltd. , https://www.cbdvapefactory.com