In led lamps, the quality of heat is directly related to the quality and life of the product. However, because of the hype of some merchants and the misinformation of so-called experts, there have been some misunderstandings. See if you have been misled?
1. Superstition thermal material
Because of the high-tech materials used, the heat can be dissipated. Its practical ordinary aluminum heat dissipation, after repeated tests, the temperature of the heat sink is only 3-5 degrees Celsius higher than the bottom of the radiator. That is to say, if a material with excellent thermal conductivity can be used, the temperature can be lowered by 3-5 degrees Celsius when the thermal resistance is zero.
2. Superstition heat pipe
The heat pipe has a good thermal conductivity, which is beyond doubt. But the heat that is derived from the heat sink eventually needs to go tropical through air convection. If there are no fins that dissipate heat, the heat pipe will soon reach thermal equilibrium and the temperature will rise with the heat sink. If you add heat sink fins to the heat pipe, you will eventually use fins to dissipate heat. Moreover, the contact points of the fins and the heat pipes are not as good as other methods. The result is a high cost and no improvement in heat dissipation. However, it is useful to use heat pipes on the integrated led, but the structure is reasonable!
3. Superstitious nano-radiation materials
Radiation heat dissipation is negligible in the current temperature of the lamp at around 50 degrees Celsius. The radiation coatings promoted by the manufacturers have a good radiation effect even if they are advertised, even if they reach the radiation capacity of black body radiation, the heat dissipation proportion is only a few percent. How this is yet to be considered! And the coating itself can hinder the heat transfer, which affects the heat dissipation of the convection.
Fast charging,Fast heat radiation,longer life,safety and stability.
Raw materials:
-100% pure lithium cobalt oxide core, high-density ceramic diaphragm, Ensure capacity density same with original 1: 1.
-Load IC from IBM manufacturer can received excessive current meanwhile not automatic shut off.
-TI
IC is Apple original battery chip supplier, the main control chip
automatic updated with original iOS system operation data. Ensure
stability without worrying about power diving. Ensure normal battery
loss, automatic identification with the original battery to maintain the
same performance, intelligent identification, intelligent operation, no
blue screen.
-OEM order connector, high precision, to ensure stable connection with mobile phones, accurate reading data.
*Related Products:
iPhone Li-ion Battery TI IC,iPhone Replacement Battery TI IC,iPhone Battery TI IC,iPhone Replacement
Shenzhen Aokal Technology Co., Ltd. , https://www.aokal.com