Standalone Air Purifier

Model NO.: EAC 300
Power Source: AC Source
Operating Principle: Active + Passive
Purifying Technology: HEPA
Trademark: ENCHOY
Transport Package: Cartonbox
Origin: China
HS Code: 8501400000
EAC 300 Residential stand alone air purifier.
Standalone Air Purifier




Enchoy EAC 300 airpurifier for your home or office
will clean your indoor air to low PM2.5 level 
with 3 layer filters and equipped with DC motors
Standalone Air Purifier
  <  Carbon filter for remove bad odour, formalhedyde,
   Smoke, cooking fume and other volatile gases.
 Standalone Air Purifier

Controlled with the purifiers display or by remote control


 
Weight ( Kg ) CMH Noice ( Db ) power ( V/Hz ) Effect ( W )
5.1 300 34 220/50 46

DC Fan

The role of the car amplifier is to select and preprocess the audio input signal, and to amplify the power, so that the electrical signal has the ability to drive the speaker. Car power amplifiers are slightly different from those in ordinary home theaters. Because many car hosts integrate power amplification functions to play a pre-amplification function, car power amplifiers are sometimes called post-amplification, which means that they can be connected and amplified. High level input over.
Amplifier is an indispensable component of a good sound system. The power amplifier on the host often cannot really amplify the sound current, so if you want to have a good music experience, you must install a power amplifier. Generally speaking, the power of the power amplifier is greater than the power of the speaker. Many car owners think that installing a bass amplifier is just to have a shocking effect. In fact, this is ignoring the characteristics of the car. No matter how high-end cars are, there will be noise. The bass part of the music released during driving will be different to different degrees. The roar is mixed, and the addition of a bass amplifier can increase the reserve power, reduce noise interference and reduce distortion.
When the power tube of the power amplifier is working, the temperature of the tube core is about 120 degrees, and the heat must be dissipated in a certain way. But the temperature of the Heat Sink exceeds 60 degrees, and even the case is hot, which may be a problem. Therefore, it can be seen that adding a cooling fan with good cooling performance and high reliability is a necessary way and the key to solving the heat dissipation problem of the power amplifier system.

Original Electronics Technology (Suzhou) Co., Ltd. , https://www.original-te.com