Introduction: Electric kettle is a must-have small household appliance that is easy and fast to use, but it is inevitable that the kettle is used for a long time. How can the electric kettle eliminate scale?
If there is limescale in the kettle, you can buy a lemon, chop the lemon and put it in the kettle. Add water to boil for a while. The citric acid in the lemon can easily remove the scale.
Hawthorn can not only remove scale but also prevent scale formation. The specific method is to buy a hawthorn back, yam cut into the kettle to cook once or twice, scale naturally fell off. If you buy a new kettle, you can put it in and cook it for a while. Scale will not be produced in this kettle. However, it should be noted that the inner wall of the kettle should not be scrubbed, otherwise it will lose the effect of scaling.
The main components of scale are carbonates such as calcium carbonate, which react with acetic acid in vinegar to produce water-soluble substances, minerals and carbon dioxide gas. Generally, supermarkets can buy white vinegar and put it into a kettle scale with 10% white vinegar. Then fill it with water and boil it for about an hour. Then you can scrub it. The vinegar is OK, but the effect of the vinegar is not as good as white vinegar.
General electric kettle heating plate is made of aluminum, in the electric kettle boil water, it is easy to form scale, generally we can put 1 tsp baking soda, boil a few minutes, the scale is removed. Or you can pour about 500 grams of baking soda water with a concentration of 1%, shake gently, and the scale can be removed.
We adopt the advanced technology imported from Europe, patented technology, specialized software to optimize the design for33kV cast resin Dry Type Transformer. The core is made of cold-rolled grain-oriented silicon steel sheet which cut in step-lap by GEORG Germany TBA core cutting lines and laminated by the method of fifth-order step-by-step stacking technology, enabling the no-load performance of the core to improve greatly. The epoxy resin from American HUNTSMAN is adopted for the windings which casted in the vacuum resin casting machine imported from HEDRICH, Germany. The winding material ensures good permeability, no bubbles occur, which leads to minimum partial discharge. The HV and LV winding mate with each other tightly, which ensures solid strength of structure and capability to withstand short circuit and vibration. Under normal service condition, the service life of dry type transformer is 30 years. No crack will form on the surface of transformer winding due to temperature variation as long as the transformer runs under normal service condition.
Earthing Transformer,33Kv Dry Type Transformer,33Kv Transformer,33Kv Cast-Resin Transformer
Hangzhou Qiantang River Electric Group Co., Ltd.(QRE) , https://www.qretransformer.com