High-quality audio accessories and wires can maximize the potential of sound. The selection of high-quality wire is the best way to reduce audio transmission loss. Safe and accurate installation can maximize the sound potential.
The reasonable connection of the sound source is an important link. The line of the constant wire must be suitable. Do not let the control panel flicker and dim. The stable current is the first guarantee of the tone.
The cable and signal cable of the power cable must be separated, at least 20CM. This is the basic common sense of the cable. In the case that there may be interference signals (generator or computer module), it must be and may be The cables that interfere with the signal are arranged in a cross-alignment so that the two wires form a right angle, which eliminates the magnetic field of the wires and prevents noise. For the anti-theft device and the central control lock, do not tie it with the audio line. The cable should ensure that the solid fixing is as large as possible (the excess is best cut), and the contact points should be as large as possible to avoid heat generation.
The power line of the power amplifier must have enough current to pass. If the wire diameter is too thin, the performance of the power amplifier is not enough. We often overlook the ground wire. In fact, the ground wire is also one of the important installation links. Narrow, no matter how good the equipment will not play well.
Finally, in the protection of the line, especially in the iron sheet, it must be protected with a wave tube. If there is no wave tube, you can go to the hardware store to buy some similar tubes instead.
High-quality audio accessories and wires can maximize the potential of sound. The selection of high-quality wire is the best way to reduce audio transmission loss. Safe and accurate installation can maximize the sound potential.
The reasonable connection of the sound source is an important link. The line of the constant wire must be suitable. Do not let the control panel flicker and dim. The stable current is the first guarantee of the tone.
The cable and signal cable of the power cable must be separated, at least 20CM. This is the basic common sense of the cable. In the case that there may be interference signals (generator or computer module), it must be and may be The cables that interfere with the signal are arranged in a cross-alignment so that the two wires form a right angle, which eliminates the magnetic field of the wires and prevents noise. For the anti-theft device and the central control lock, do not tie it with the audio line. The cable should ensure that the solid fixing is as large as possible (the excess is best cut), and the contact points should be as large as possible to avoid heat generation.
The power line of the power amplifier must have enough current to pass. If the wire diameter is too thin, the performance of the power amplifier is not enough. We often overlook the ground wire. In fact, the ground wire is also one of the important installation links. Narrow, no matter how good the equipment will not play well.
Finally, in the protection of the line, especially in the iron sheet, it must be protected with a wave tube. If there is no wave tube, you can go to the hardware store to buy some similar tubes instead.
High-quality audio accessories and wires can maximize the potential of sound. The selection of high-quality wire is the best way to reduce audio transmission loss. Safe and accurate installation can maximize the sound potential.
The reasonable connection of the sound source is an important link. The line of the constant wire must be suitable. Do not let the control panel flicker and dim. The stable current is the first guarantee of the tone.
The cable and signal cable of the power cable must be separated, at least 20CM. This is the basic common sense of the cable. In the case that there may be interference signals (generator or computer module), it must be and may be The cables that interfere with the signal are arranged in a cross-alignment so that the two wires form a right angle, which eliminates the magnetic field of the wires and prevents noise. For the anti-theft device and the central control lock, do not tie it with the audio line. The cable should ensure that the solid fixing is as large as possible (the excess is best cut), and the contact points should be as large as possible to avoid heat generation.
The power line of the power amplifier must have enough current to pass. If the wire diameter is too thin, the performance of the power amplifier is not enough. We often overlook the ground wire. In fact, the ground wire is also one of the important installation links. Narrow, no matter how good the equipment will not play well.
Finally, in the protection of the line, especially in the iron sheet, it must be protected with a wave tube. If there is no wave tube, you can go to the hardware store to buy some similar tubes instead.
Explosion Proof Spotlight,Fixture LED Spotlight,Fixture Spotlight
Lighting-Hazardous Co., Ltd. , http://www.nsemergencylight.com